Absen A2712 V3 User Manual

A27 V3 Series Product User Manual
8
 Support front installation, front or rear wiring, and support hanging, wall
mounting, and steel structure installation methods.
 The bottom of the panel is designed with a protective lamp stand to reduce
lamp drop during floor and splicing installation.
 The rear cover of the panel adopts a rotary shaft type buckle design, which
can meet the needs of fast rear wiring without removing the cover.
 The product comes standard with an exquisite edge trim design scheme.
 The receiving card adopts high-precision connectors for docking, which is
stable, reliable, and convenient for maintenance.
1.2.2 Feature design
 The panel supports signal and power backup, with dual receiving cards and
dual power configurations.
 The pixel design of the panel meets the 16:9 ratio, which can achieve
point-to-point 2K/4K/8K.
 Adopting advanced hidden circuit design, there is no "caterpillar" or "ghost"
phenomenon.
 Adopting PWM constant current output high-end chips, achieving high gray
in low brightness, rich color levels, and precise presentation of details.
 Adopting Absen A5C+ point by point chromaticity and brightness correction
technology to improve display consistency and make colors more natural
and accurate. The module is equipped with a module that can store
correction parameters.
 Equipped with black screen and partial black screen dynamic
energy-saving function, the dynamic energy-saving mode is automatically
activated during use, which is efficient and energy-saving (not supported by
A2725 V3).
 The product meets the EMC Class B civilian level radiation requirements.
 Through the German Rhine TÜV low blue light certification, it filters out
harmful blue light and takes care of the eyes.
 The panel supports signal loop backup.
 The attenuation coefficient is set for a single module to ensure that there is
no color difference after maintenance and replacement.
 The software has the function of adjusting the light and dark lines with one
click.
 The calibration data can be stored on the receiving card and the module
itself, and the software can read back the data from both.
 The external test button and indicator light make the panel testing and
operation status clear at a glance.

Absen A2712 V3 Specifications

General

Brand	Absen
Model	A2712 V3
Category	Digital Signage
Language	English