PL Lite Series User Manual - 3 -
Safety Information
The following marks on the product and in this manual indicate important safety measures.
WARNING: Be sure to understand and follow all safety guidelines, safety instructions,
warnings and precautions listed in this manual.
This product is for professional use only!
This product may result in serious injury or death due to fire hazard, electric shock, and
crushing hazard.
Please read this manual carefully before installing, powering up, operating and maintenance
of this product.
Follow safety instructions in this manual and on the product. If you have any questions,
please seek help from Absen.
Beware of Electric Shock!
• To prevent electric shock the device must be properly grounded during installation, Do not
ignore using the grounding plug, or else there is a risk of electric shock.
• During a lightning storm, please disconnect the device’s power supply, or provide other
suitable lightning protection. If the equipment is not in use for a long time, please
unplug the power cord.
• When performing any installation or maintenance work (e.g. removing the fuses, etc.,)
make sure to turn off the master switch.
• Disconnect AC power when the product is not in use, or before disassembling, or installing
the product.
• The AC power used in this product must comply with local building and electric codes, and
should be equipped with overload and ground fault protection.
• The main power switch should be installed at a location near the product and should be
To Next Page
Loading...
Need help?
General
