Chapter 3: Meter Memory, Setup, and Downloading
Memory
Storing Test Results
The meter automatically stores up to 500 blood glucose test results with the time and
date of the test and any test markers. You can review them at any time. Test results
are stored from the newest to the oldest. It is very important to set the correct time and
date in the meter. Having the correct time and date setting helps ensure appropriate
interpretation of blood glucose results by you and your healthcare professional.
Notes:
Do not change your therapy based on one individual result in memory.•
The memory is not lost when you replace the batteries. You do need to check that the time •
and date are correct after you replace the batteries.
Once 500 results are in memory, adding a new result causes the oldest one to be deleted.•
If more than 500 tests are performed within a 90 day period, only the most recent 500 •
results are included in the 90 day average.
Hold • or down to scroll through the results faster.
27
43604_NanoAv_12hr_Ins_EN.indd 27 11/24/08 11:08:35 AM
To Next Page
Loading...
Need help?
General
