TIME / DATE
(hrs, min, am/pm,
month, day, year)
BEEPER
(on/off)
ALARM CLOCK
(A-1, A-2, A-3, A-4)
HYPO ALARM
(off, on, level)
You are here
Setting the Alarm Clock Function
The alarm clock function is a handy way to remind you to test. You can set up to four alarms
per day. The meter beeps every two minutes—up to three times. You can turn the alarm off
by inserting a test strip or pressing any button. You must have the beeper set to “On” for the
alarm to sound.
Your new meter is pre-set with the alarm clock function set to “OFF.” You must turn it “On” to
use this feature.
If you turn A-1, A-2, A-3, and A-4 on, the meter is pre-set with the following times for your
convenience. You can adjust the times to suit your needs.
A-1 8:00 am A-2 12:00 pm (noon) A-3 6:00 pm A-4 10:00 pm
Notes:
• If you tested within 30 minutes of an alarm, the alarm does not occur.
• If the meter is on at the alarm time, the alarm does not occur.
• Exposure to cold conditions may disable alarms until the meter is turned on.
38
To Next Page
Loading...
Need help?
General
