59
Setting Test Reminders
One to four test reminders can be set per day. The meter beeps every 2 minutes – up to 3 times. Turn o the
test reminder by inserting a test strip or pressing any button. The beeper must be set to “On” for the test
reminder to sound.
The meter is preset with the test reminders set to “OFF.” They must be turned “On” to use this feature.
If A‑1, A‑2, A‑3, and A‑4 are turned on, the meter is preset with the following times which can be adjusted
as necessary.
A-1 8:00 am A-2 12:00 pm (noon) A-3 6:00 pm A-4 10:00 pm
TIME / DATE
(hrs, min, am/pm,
month, day, year)
BEEPER
(on/o)
TEST REMINDERS
(A‑1, A‑2, A‑3, A‑4)
HYPO ALERT
(o, on, level)
You are here
NOTE
• If a test was performed within 30 minutes of a test reminder, the test reminder does not occur.
• If the meter is on at the test reminder time, the test reminder does not occur.
• Exposure to cold conditions may disable test reminders until the meter is turned on.
• When you are setting the time for test reminders, the bell symbol remains on the display and “set‑up”
flashes continuously.
To Next Page
Loading...
Need help?
General
