Chapter 1 31
Advanced Features
PIP/PBP/POP
T Press the PIP/PBP button once to display activate picture-in-picture (PIP).
T Press twice to activate picture-by-picture (PBP).
T Press three times to activate picture-on-picture (POP). Then, the POP screens will display the TV
Channel programs on by one.
NOTE: The OSD menu is not available in PIP/POP/PBP modes.
PBP (Picture-by-Picture)
PIP (Picture-in-Picture)
PIP
PBP
POP (Picture-on-Picture)
POP POP POP
POP
POP
PIP
1a. Press the ACTIVE key to toggle between PIP screens.
TV AV COMPONENT PC
1b. Press the TV, AV, COMPONENT or PC keys, number keys or
CH up or down to change the content of the active screen.
2. Press the SWAP key to change the content between the
primary and the subscreen.
PIP PIP
Swap
3. Press the POSITION key to select the location of the
subscreens, from upper left -> upper right -> lower right ->
lower left, as shown in the image.
PIP PIP
PIP PIP
4. Press the SIZE/MODE key to select the size of the subscreen,
from 25% -> 37.5% -> 50%, as shown in the image.
PIP
To Next Page
Loading...
Need help?
General
