- 5 -
3. Product Overview
3.1. Introduction
G225HQ is defined as our new 21.5”W model in ACER V series which will be the ACER project in Qisda.
G225HQ is defined as 21.5”W LCD Monitor supports 1920(H) x 1080(V) resolution with DPMS (Display Power
Management System) and ACER eColor function. There are double input types, D-sub and DVI. G225HQ
adopts LGD panel LM215WF1-TLA1, AUO panel M215HW01 . G225HQ has included 1W+1W speaker.
G225HQ also support ACM 50000:1.
The features summary is shown as below,
*All panel spec. in Q201 definition depends on the variance of panel source.
*All spec. of monitor need to warm up at least 1hr.
* To test the “Contrast Ratio” and “Luminance” functions, the color status must be “User preset” mode.
* 1. “Contrast Ratio”: Set “brightness” at 100, and “contrast” at 50.
* 2. “Luminance”: Set “brightness” at 100, and “contrast” at 100.
Panel supplier & module name
LGD LM215WF1-TLA1
AUO M215HW01
Panel Display information
LGD: 0.248 mm x 0.248 mm
SEC: 248.25 um x 248.25
um
Viewing Angle (@ Contrast Ratio >= 10)
R/L:170 degrees (typ)
U/D: 160 degrees (typ)
Analog interface with Scaling supported
With 15-pin D-sub
connector
HDMI interface with Scaling supported
Max resolution mode supported
Number of Display Colors supported
LGD:
1000:1 (typ.), 700:1(min)
AUO:
1000:1 (typ.), 600:1(min)
Test Condition: Set Contrast
at 50, Brightness at 100,
Color at User preset
300 cd/m
2
(typ.),250 cd/m
2
(min)
Test Condition: Set Contrast
at 50, Brightness at 100,
Color at User preset
DC power input (with AC power adapter)
LED indicator for power status showed
OSD for control & information supported