14
English
Setting Menu
The Setting menu is used for adjusting the general settings for current input signal such
as aspect ratio, OSD language, and etc.
Setting
Wide Mode
DDC/CI
ACM
Input
Language
Reset
Full
ON
OFF
VGA
English
1 Press the Menu button to bring up the OSD menu.
2 Press the < / > button to select Setting and press the Menu button to enter the
Setting menu.
The following options are available in the Setting menu: Wide Mode, DDC/CI, ACM,
Input, Language, and Reset.
3 Press the < / > button to scroll through the Setting options, and press the Menu
button to enter its sub-menu.
4 Press the < / > button to adjust/select the setting and press the Auto button to
confirm.
To Next Page
Loading...
Need help?
General
