Acer G245H User Manual

EN-6
Attaching / Removing the Base
SCREEN POSITION ADJUSTMENT
In oder to optimize the best viewing position, you can adjust the tilt of
the monitor by using both of your hands to hold the edges of the monitor
as shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indi-
cated by arrow below.
--------------------------------------------------------------------
Note: Remove the monitor and monitor base from its packaging.
Carefully place the monitor face-down on a stable surface -- use a
cloth to avoid scratching the screen.
Install:
Align the release button on the
bottom of the monitor with the
corresponding
slots on the bottom of the base.
Remove:
Depress the release button as
indicated first before removing the
base and follow the arrow direction
to remove it.

Acer G245H Specifications

General

Pixel pitch	0.276 x 0.276 mm
Aspect ratio	16:9
Response time	2 ms
Display diagonal	24 \
Vertical scan range	55 - 75 Hz
Viewable size, vertical	299 mm
Contrast ratio (typical)	-
Viewable size, horizontal	531 mm
Viewing angle, horizontal	176 °
Display brightness (typical)	300 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Certification	CE, TÜV GS, ISO 13406-2
Product color	Black
Tilt angle range	-5 - 15 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (off)	0.8 W
Power consumption (standby)	1.2 W
Power consumption (typical)	30.5 W

Weight and Dimensions

Depth (without stand)	417.8 mm
Width (without stand)	574.8 mm
Height (without stand)	194.4 mm
Weight (without stand)	5100 g