Acer G245H User Manual

EN-8
Power saving
The monitor will be driven into Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State
LED
Light
ONBlue
Power Saving
Mode
Orange

Acer G245H Specifications

General

Pixel pitch	0.276 x 0.276 mm
Aspect ratio	16:9
Response time	2 ms
Display diagonal	24 \
Vertical scan range	55 - 75 Hz
Viewable size, vertical	299 mm
Contrast ratio (typical)	-
Viewable size, horizontal	531 mm
Viewing angle, horizontal	176 °
Display brightness (typical)	300 cd/m²
HDCP	Yes
DVI-I ports quantity	0
Certification	CE, TÜV GS, ISO 13406-2
Product color	Black
Tilt angle range	-5 - 15 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (off)	0.8 W
Power consumption (standby)	1.2 W
Power consumption (typical)	30.5 W

Weight and Dimensions

Depth (without stand)	417.8 mm
Width (without stand)	574.8 mm
Height (without stand)	194.4 mm
Weight (without stand)	5100 g