Acer P1287 User Manual

33
English
Note: Functions vary depending on model definition.
Management
Note: Functions vary depending on model definition.
ECO Mode Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Turn Off Mode
• Instant Off: Shuts down the projector without fan cooling.
• Instant Resume: Resumes the system when the Power button
is pressed again within 2 minutes.
Auto Shutdown The projector will automatically shutdown when there is no signal
input after the allocated time. (default is 15 minutes)
AC Power On Choose "On" to power on projector while AC power plug in.
Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).
Lamp Reminding Activate this function to display a reminder to change the lamp 30
hours before its expected end-of-life.
Lamp Hour Reset
Press the button and choose "Yes" to turn the lamp hour
counter to 0 hours.
3D Dust Filter Replacement Reminder
Default of Replacement Reminder is "Off". Select "On" to activate
filter replacement reminder after installing 3D dust filter.
Place
Choose one of three places (indoor, outdoor, and Loess area) based
on actual environment. The default is "indoor".
Filter Hour
Show the filter used hour information. When meeting max time
based on selected place, it will pop up a warning message to ask
for replacing filter.
Filter Reset
Press the button and choose "Yes" to return the parameter to
the factory default after replacing new 3D dust filter.

Acer P1287 Specifications

General

Placement	Ceiling
Product type	-
Product color	Black
Market positioning	Presentation
Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	1.5 - 9.8 m
Projection technology	DLP
Supported aspect ratios	16:9
Contrast ratio (dynamic)	17000:1
Screen size compatibility	38 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 40 °
Vertical synchronization (max)	0.12 kHz
Vertical synchronization (min)	0.024 kHz
Horizontal synchronization (max)	100 kHz
Horizontal synchronization (min)	15 kHz
3D	Yes
Full HD	No
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
Focus	Manual
Digital zoom	2 x
Optical zoom	1.2 x
Focal length range	18.17 - 21.81 mm
Aperture range (F-F)	2.41 - 2.7
Lamp type	UHP
Lamp power	260 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
RMS rated power	10 W
Number of built-in speakers	1
USB connector type	Mini-USB B
HDMI connector type	Full-size
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	330 W
Power consumption (economy mode)	280 W
Noise level	34 dB
Noise level (economic mode)	29 dB
Operating temperature (T-T)	0 - 40 °C
Cables included	AC, VGA
Remote control type	IR

Weight and Dimensions

Weight	2500 g