Acer P1287 User Manual

43
English
OSD Messages
Problems with the Projector
# Condition Message Reminder
1 Message
• Fan Fail - the system fan is not working.
• Projector Overheated - the projector has exceeded its
recommended operating temperature and must be allowed
to cool down before it may be used. Please check the
following message.
Please also check the dust filters if they are installed. If the
dust filter is clogged with dust, please clean it. Please refer to
"Cleaning and replacing the dust filter" for details.
• Replace the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.
# Condition Solution
1 The projector stops responding
to all controls
If possible, turn off the projector, then
unplug the power cord and wait at least 30
seconds before reconnecting power.
2 Lamp burns out or makes a
popping sound
When the lamp reaches the end of its useful
life, it will burn out and may make a loud
popping sound. If this happens, the projector
will not turn on until the lamp module has
been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp"
section.

Acer P1287 Specifications

General

Placement	Ceiling
Product type	-
Product color	Black
Market positioning	Presentation
Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	1.5 - 9.8 m
Projection technology	DLP
Supported aspect ratios	16:9
Contrast ratio (dynamic)	17000:1
Screen size compatibility	38 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 40 °
Vertical synchronization (max)	0.12 kHz
Vertical synchronization (min)	0.024 kHz
Horizontal synchronization (max)	100 kHz
Horizontal synchronization (min)	15 kHz
3D	Yes
Full HD	No
Analog signal format system	NTSC, PAL, SECAM
Supported graphics resolutions	1920 x 1200 (WUXGA)
Focus	Manual
Digital zoom	2 x
Optical zoom	1.2 x
Focal length range	18.17 - 21.81 mm
Aperture range (F-F)	2.41 - 2.7
Lamp type	UHP
Lamp power	260 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
RMS rated power	10 W
Number of built-in speakers	1
USB connector type	Mini-USB B
HDMI connector type	Full-size
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	0
Power source	AC
AC input voltage	100 - 240 V
Power consumption (standby)	- W
Power consumption (typical)	330 W
Power consumption (economy mode)	280 W
Noise level	34 dB
Noise level (economic mode)	29 dB
Operating temperature (T-T)	0 - 40 °C
Cables included	AC, VGA
Remote control type	IR

Weight and Dimensions

Weight	2500 g