Acer S220HQL User Manual

15
English
DVI/HDMI mode (Optional)
Problem LED status Remedy
No picture visible Blue Using the OSD menu, adjust brightness and
contrast to maximum or reset to their default
settings.
Off Check the power switch.
Check if the AC power cord is properly
connected to the monitor.
Blinking Blue Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on
and in power saving/standby mode.

Acer S220HQL Specifications

General

3D	No
Aspect ratio	16:9
Backlight type	W-LED
Display diagonal	21.5 \
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	100000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
On/off switch	Yes
HDMI ports quantity	0
LED indicators	Power
Tilt angle range	-5 - 15 °
Cable lock slot type	Kensington
Panel mounting interface	No mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	22 W
Power consumption (off)	0.5 W
Power consumption (standby)	0.6 W
Certification	MPR II
Product color	Black
Market positioning	-
Cables included	AC, DVI, VGA

Weight and Dimensions

Width (without stand)	- mm
Weight (without stand)	- g