Acer XB252Q User Manual

EN-7
POWER SAVING
The monitor will be driven into “Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State LED Light
ON Blue
Power Saving Mode Amber

Acer XB252Q Specifications

General

3D	No
Panel type	TN+Film
Screen shape	Flat
Display diagonal	24.5 \
Display technology	LED
Native aspect ratio	16:9
Maximum refresh rate	240 Hz
Viewable size, vertical	303 mm
Viewing angle, vertical	160 °
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	544 mm
Viewing angle, horizontal	170 °
Display brightness (typical)	400 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
HDMI	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
VGA (D-Sub) ports quantity	0
Pivot angle	-90 - 90 °
Cable lock slot	-
Tilt angle range	-5 - 21 °
Panel mounting interface	100 x 100 mm
RMS rated power	4 W
Number of speakers	2
AC input voltage	120 - 230 V
Power consumption (off)	0.43 W
Power consumption (standby)	0.46 W
Power consumption (typical)	23 W
Product color	Black
Market positioning	Gaming
Cables included	DisplayPort, USB

Weight and Dimensions

Depth (without stand)	70.5 mm
Width (without stand)	557.9 mm
Height (without stand)	505.9 mm
Weight (without stand)	4350 g