Acer XB253Q User Manual

EN-6
POWER SAVING
The monitor will be driven into “Power Saving” mode by the control signal
from the display controller, as indicated by the amber-color power LED.
The power saving states will be kept until a control signal has been detected
or the keyboard or mouse is activated. The recovery time from Active OFF
state back to ON state is around 3 seconds.
DDC
To make your installation easier, the monitor is able to Plug and Play with
your system if your system also supports DDC protocol. The DDC (Display Data
Channel) is a communication protocol through which the monitor
automatically informs the host system about its capabilities, for example,
supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
State LED Light
ON Blue
Power Saving Mode Amber

Acer XB253Q Specifications

General

Screen shape	Flat
Backlight type	LED
Display diagonal	24.5 \
Display technology	-
Native aspect ratio	16:9
Maximum refresh rate	240 Hz
Contrast ratio (dynamic)	100000000:1
Display number of colors	16.7 million colors
Display brightness (typical)	400 cd/m²
Tilt angle range	-5 - 25 °
Panel mounting interface	100 x 100 mm
NVIDIA G-SYNC type	G-SYNC Compatible
RMS rated power	2 W
Number of speakers	2
Certification	MPR II
Product color	Black
Market positioning	Gaming
Number of upstream ports	1
USB Type-A downstream ports quantity	4
Cables included	AC, DisplayPort, HDMI, USB
Power consumption (max)	70 W
Power consumption (off)	0.25 W
Power consumption (standby)	0.45 W
Power consumption (typical)	17.4 W

Weight and Dimensions

Depth (with stand)	236.22 mm
Width (with stand)	558 mm
Height (with stand)	513.08 mm
Weight (with stand)	5307 g
Depth (without stand)	66.04 mm
Height (without stand)	330 mm
Weight (without stand)	3220 g