AEO RX14 Series User Manual

AEO RX14x / RX14x-E / RX15x-E Series Mini Micro Receiver
Instruction Manual
How to use ESC:
RX14x Series
Connect the positive pole of the brushed motor to“M+” and the negative pole to “M-”to replace the
throttle channel, as picture 1.1.
The integrated brushed ESC has the lock function of preventing accidental touch. After the receiver is
powered on, the throttle channel remains at the lowest position for more than 2 seconds, then this function
can be cancelled and the brushed ESC can be used normally.
RX14x-E Series
Connect the three wires of the brushless motor to the "THR". Please pay attention to the rotation direction of
the motor. If you need to change the rotation direction of the motor, please change the position of any two
of the three wires. As picture 1.2
RX15x-E Series:
Connect the three wires of the brushless motor to the "THR". Please pay attention to the rotation direction of
the motor. If you need to change the rotation direction of the motor, please change the position of any two
of the three wires. As picture 1.3.
3.Automatic frequency matching
After the receiver is powered on after 15 seconds, it still fails to complete the frequency alignment, the
receiver will enter the automatic frequency matching mode. At this time, the LED light will change from slow
flashing to fast flashing, then please complete the frequency matching according to the frequency matching
operation of the transmitter.
4.TELEM Function Introduction,
Firstly, you need a remote control with TELEM to use this TELEM function.
This function could realize real-time monitoring to battery voltage, receiver voltage, receiver signal strength
and receiver operating temperature, allowing users to master the working status of receiver and battery in
real time to avoid unexpected situations in flight.

AEO RX14 Series Specifications

General

Brand	AEO
Model	RX14 Series
Category	Receiver
Language	English

Summary

Version Selection

Basic Data

Receiver Interface Definition

RX14x Interface

Defines the pinout and connections for the RX14x receiver model.

RX14x-E Interface

Defines the pinout and connections for the RX14x-E receiver model.

RX152-E Interface

Defines the pinout and connections for the RX152-E receiver model.

Combine Receiver and Transmitter

Function Introduction

Aileron Double Servo Mode

Explains dual aileron servo setup for specific receiver models.

Integrated ESC Usage

Details how to use the integrated ESC for RX14x, RX14x-E, RX15x-E series.

Automatic Frequency Matching

Describes the process of automatic receiver-transmitter frequency alignment.

TELEM Function Introduction

Explains the TELEM function for real-time monitoring of receiver status.

Version Selection RX24x

Basic Data RX24x

Receiver Interface Definition RX24x

Combine Receiver and Transmitter RX24x

Function Introduction RX24x

How to Use ESC RX24x

Instructions for connecting and operating the ESC for RX24x series.

How to Use Linear Servo

Guidance on connecting and controlling linear servos with RX24x.

TELEM Function Introduction RX24x

Explains the TELEM function for real-time monitoring on RX24x.

Version Selection RX34x

Basic Data RX34x

Interface Definition RX34x

Combine Receiver and Transmitter RX34x

Function Introduction RX34x

How to Use ESC RX34x

Instructions for connecting and operating the ESC for RX34x series.

Connection for Electromagnetic Servo

Details on connecting electromagnetic servos to RX34x.

PWM Signal Servo Connection

Explains PWM signal connection for servos on RX34x.

TELEM Function Introduction RX34x

Explains the TELEM function for real-time monitoring on RX34x.

Version Selection RX44x

Basic Data RX44x

Receiver Interface Definition RX44x

Combine Receiver and Transmitter RX44x

Function Introduction RX44x

How to Use ESC RX44x

Instructions for connecting and operating the ESC for RX44x series.