Operation Instruction
-16-
main clutch, so as to prevent collision of teeth of drive gear of gear box and the early
damage of clutch.
2.5 Steering of tractor
When steering of tractor on road, the horn switch on the instrument panel shall be operated
firstly; whistling sound shall be made for warning, and then make a turn. If the speed is high,
reduce the speed firstly. In case of shallow turn, steer early and slowly; in case of sharp turn, steer
late and quickly.
When the tractor have little steering or steering on the soft field, because of the front wheel
side slip cause the steering unavailable , can steering the steering wheel and tread the pedal at
the same time to help steering.
Warning:
1. When the tractor is driving at a high speed, making a sharp turn by adopting
unilateral braking is unallowable. When the front wheel make a wide turn, if there is squeak
when the safety valve works, the steering wheel shall be withdrawn a little, so as to avoid
the damage caused by long-time overload of hydraulic steering system and steering failure
accident;
2. When making a turn or head back during field work, the working parts of agricultural
implement inserted into soil must be lifted above ground, so as to avoid damage of
agricultural implement or personal injury.
2.6 Gear shift of tractor
The main and sub gear shift is respectively operated by 2 operating levers, realizing 12
forward shift stages and 4 reverse gear stages. The main gear shift lever may get 4 gears (1, 2, 3,
4); the sub gear shift lever may get 3 forward speed areas (L: low speed area, M: medium speed
area, H: high speed area) and 1Reverse area: R.
Main gear shift lever A Sub gear shift lever B
To Next Page
Loading...
Need help?
General
