Accessories, Spare Parts and Quick-Wearing Parts
-41-
3. Accessories, Spare Parts and Quick-Wearing Parts
3.1 Accessories
The accessories of the tractor include fan heater, pendulum type draw bar, etc.
3.1.1 Fan heater (optional)
The fan heater on the tractor is installed in the front upper part in the driver’s cab. The fan
heater switch is installed on the fan heater. The fan heater will be in operation as long as the fan
heater switch is turned on, to make working temperature comfortable in cab.
When it needs to be ventilated in the cab (especially in summer), nothing remains but to shut
off the hot circulating water outlet valve of the fan heater on engine and turn on the fan heater
switch; here the fan of fan heater will be in operation.
The two small flop gates on both left and right sides of fan heater are used to regulate air
stream circulation.
3.1.2 Pendulum type draw bar (optional)
The pendulum type draw bar is only used in trailed implement. Rear end of the draw bar is
connected with farm implement by draw pin. The draw bar can swing transversely and it is
relatively easy to connect with farm implement. The draw bar in operation can swing left and right,
but when the tractor draws farm implement to go backward, the locating pin must be inserted in
the hole of draw plate to prevent draw bar swinging.
The height of traction point can be changed by turning draw bar to make traction height
suitable to the farm implement.
Warning:
For the tractor with fan heater or air conditioner installed, anti-freezing
solution must be applied to the cooling system of engine to protect fan heater
or air conditioner from frost crack.
To Next Page
Loading...
Need help?
General
