Allen & Heath AP2794 issue 3 8
GL4000-832 + Expander
Note: remove existing assignment links on all connector circuit boards before re-assignment.
GL4000-840 + Expander
Attaching the base panels
15. Attach the base panel joining bracket ‘M’ to the console base using screws ‘E’. Refit the base panels onto
the expanded console using screws
‘E’ .
Console with integral meterbridge.
Fit the meterbridge side plate ‘R’ using the screws from the original side trim.
1 - 8
9 - 16 Master 25 - 32 17 - 24
Expander
3R 4R 5R
6R 1L 2L 3L
3R 4R 5R
6R 1L 2L 3L
3R 4R 5R
6R 1L 2L 3L
3R 4R 5R
6R 1L 2L 3L
3R 4R 5R
6R 1L 2L 3L
3R 4R 5R
6R 1L 2L 3L
9 - 16
17 - 24 Master 33 - 40 25 - 32 Expander
1 - 8