WZ
3
20S User Guide 25
Connections
Mono channel XLR balanced pin 2 hot Sensitivity -60 to +10dBu
TRS balanced, tip hot Sensitivity -40 to +10dBu
Pad out (MIC) 2k ohm
Pad in (MIC or LINE) >10k ohm, -20dB
Max input level +30dBu
XLR phantom power +48V, on/off
Stereo channel A TRS unbalanced >10k ohm, -16 to +20dBu
B XLR balanced >10k ohm, -16 to +20dBu
Stereo returns EXT1 TRS balanced >10k ohm, -6 to +20dBu
EXT2 TRS unbalanced >2k ohm, -2 to +20dBu
Inserts Channel TRS, tip send, ring return, 0dBu
Output TRS, tip send, ring return, -2dBu
L, R, M outputs XLR balanced pin 2 hot <75 ohm, +4dBu, +26dBu max
Aux 1-6 output TRS impedance balanced <75 ohm, -2dBu, +21dBu max
Electronic balance option <75 ohm, +4dBu, +26dBu max
Direct out TRS impedance balanced <75 ohm, 0dBu, +21dBu max
AB out TRS impedance balanced <75 ohm, -2dBu, +21dBu max
Relay isolate user option
Headphones TRS, tip L, ring R, 30 to 600 ohm headphones recommended
Lamp 4-pin XLR max 12V 5W lamp
MixWizard 3 Series Part Numbers v = voltage
WZ
3
12:2 8 mic/line, 2 dual stereo, LR console W31202/v
WZ
3
16:2 16 mic/line LR console W31602/v
WZ
3
14:4:2 10 mic/line, 2 dual stereo, 4 group console W31442/v
WZ
3
20S 4 mic/line, 8 dual stereo, LR console W320S/v
WZ
3
12:2 / WZ
3
16:2 / WZ
3
20S Sys-Link II output option kit W312/16-SLV2
WZ
3
14:4:2 Sys-Link II input/output option kit W31442-SLV2
WZ20S Mono switched fader 002-496
WZ20S Stereo switched fader 002-497
SSM2142P balanced output driver option IC AE0302
DRV134 balanced output driver option IC (alternative to above) AE5725
Allen & Heath MPS12 backup power supply option MPS12/v
Allen & Heath 18” gooseneck LED lamp LEDLAMP
To Next Page
Loading...
Need help?
General
