EasyManuals Logo
Home>ALLEN & HEATH>Music Mixer>Qu-16

ALLEN & HEATH Qu-16 Getting Started Guide

ALLEN & HEATH Qu-16
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Qu Mixer Getting Started Guide 10 AP10025 iss1
5. Rear Panel
This shows the Qu-16 rear panel. The Qu-24 and Qu-32 are similar but include Group and Matrix outputs.
5.1 Connecting and powering up the mixer
If you are using a remote AudioRack then connect it with a Cat5 digital snake. Use STP (shielded twisted
pair) Cat5e or higher spec cable up to 100m (330’) long. Cable with both foil and braided screens provide
shielding from interference and are generally more rugged. Stranded core cables are less prone to
damage when kinked or repeatedly coiled. Plug into the dSNAKE port. If you are connecting a second
AudioRack plug it into the EXPANDER port of the first.
Important - Before starting, read the Safety Instructions
Sheet packed with the mixer. These can also be
downloaded from the Allen & Heath website.
To avoid loud thumps, do not switch the mixer on or off
while the PA speakers are powered. Always switch the
amplifiers on last, and switch them off first.
Switching the mixer on – Press the ON/OFF switch.
The mixer takes just a few seconds to boot up. It restores its
previous settings. LR mix is selected and it’s processing
shown on the screen.
Switching the mixer off – First select the Home
screen. Touch Shut Down to safely complete processes
such as parameter storing and USB data transfer or
recording. Once complete, press the ON/OFF switch to turn
the mixer off.
AES digital out
2Trk out
Alt out
LR main out Lamp
Talkback
Mic in
ST1 and ST2
stereo line in
Analogue Mix outputs Mic and Line inputs
Network
dSNAKE remote audio
USB B streaming
Kensington
Lock
Cable
clamp
Power On/Off
Mains power input
Mains fuse
Once an AudioRack is recognised,
the dSNAKE icon will appear in the
screen toolbar:

Other manuals for ALLEN & HEATH Qu-16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH Qu-16 and is the answer not in the manual?

ALLEN & HEATH Qu-16 Specifications

General IconGeneral
Sample rate48 kHz
Channels quantity16 channels
Digital sound processing- bit
Output impedance75 Ω
Built-in displayYes
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power consumption (typical)82 W
XLR out12
RJ-45 ports quantity1
Headphone connectivity6.3 mm
Number of microphone inputs16
DJ mixer-
Product colorBlack
USB connector typeUSB Type-A, USB Type-B
Weight and Dimensions IconWeight and Dimensions
Depth500 mm
Width440 mm
Height186 mm
Weight10000 g
Package depth680 mm
Package width610 mm
Package height350 mm
Package weight13500 g

Related product manuals