Qu-16 User Guide 25 AP9031 iss.2
7. Touch Screen Mixing Functions
The Qu features an 800x480 pixels , full colour touch screen for quick and intuitive setup and control of
the mix.
Button – Touch to select its function or change its state. To avoid
accidental operation some functions need be touched for at least 1
second, for example switching phantom power. These are marked
‘(Hold)’.
Parameter box – Touch to change its value. The box highlights
orange to show it is selected and can be adjusted using the screen
rotary.
Option Menu – Touch to open a list of options available. Scroll
using the screen rotary and touch an item in the list to select it. Touch
outside the box to exit. Several menu lists are available within the
screens, for example, to choose the source for the AES output.
Screen Rotary – Use this to change the value of the parameter in
the box highlighted orange on the screen, or to scroll through lists.
Apply / Cancel – Some setup screens present several parameters
associated with one function, for example channel linking. These can
be chosen before they are applied. Touch Apply to accept the changes
or Cancel to close the screen without accepting the changes.
Function Key – The Fn key provides access to
further options associated with the currently selected
screen. If available, its function will appear in the lower
toolbar above the key. Press the key again to close the
option screen.
This example shows access to the Mute Groups
screens from within a Routing screen.
Screen select keys
Button
Edit keys
Screen Rotary
Other screens
Sel screens
Function key
Parameter box
TouchChannel
Touch to select
each processing
block
To Next Page
Loading...
Need help?
General
