ALLEN & HEATH QU-SB User Manual

Qu Mixer Reference Guide 40 AP9372 iss.9
9.9 Mix Routing
The Touch Screen presents tabs to access the Mix master routing assignments and send levels when its
fader strip Sel key is selected and the Touch Screen Routing screen is active. The Fn key is used to
access the Mute and DCA Group masters while in any Routing screen.
Select a mix master Sel key while the Routing screen
is active to:
Adjust the Output Balance between Left and Right
sockets of a stereo mix or LR.
Choose the global Channel Source for the selected
mix. This is the point in the channel signal path that
feeds the mix. This affects all sends to the mix.
 Choose Post-Preamp if you want the sources to
the mix not affected by any channel processing.
 Choose Pre-EQ for a monitor mix if you do not
want the channel EQ to affect the monitor.
 Choose Post-EQ if you want the EQ but not the
compressor to affect the monitor.
 Choose Post-All processing for FX sends.
Mix to Matrix Sends
The Qu-24, Qu-32, Qu-SB and Qu-Pac include two
stereo Matrix mixes. These are not available on Qu-16.
The Groups, Mixes and LR can be sent to the Matrix.
The sends to the matrix can be set Pre or Post the
send master fader. Each send can be assigned On or
Off. Its Level and Pan to the matrix can be adjusted
here.
Matrix All Sends View
To work with the sends and assignments from all
mixes to one matrix use the Matrix master
Routing screen Fn key Matrix View.
Touch a mix source box. Use the right of the
screen to adjust its parameters. Touch the
buttons and value boxes and use the screen
Rotary.
9.10 Working with the Matrix (Qu-24, Qu-32, Qu-SB, Qu-Pac)
A Matrix is a ‘mixer within the mixer’. Channel inputs
route to the Groups, Mixes and LR. These mixes can
then be routed to the Matrix to provide additional
outputs, for example:
 Stereo recording, video or broadcast
 Delay fill speakers
Access the Matrix masters using the Qu mixer top
fader Layer, the Qu-Pac Channel screen, or assign
them to the Custom Layer.
You can patch the Matrix to Alt Out, AES Out and USB
audio.
Each Matrix provides:
 Stereo mixing
 Source send Levels, Pan and Assign
 Master Fader and Mute
 Output Balance
 PEQ
 GEQ
 Compressor
 Delay
 FX Insert
Assign all channels on or off to a mix, or
set all sources pre or post-fader.
HPF GATE PEQ COMP
DELAY
0
Gain/Trim
Insert
Post-Preamp Pre-EQ Post-EQ Post-All

ALLEN & HEATH QU-SB Specifications

General

Brand	ALLEN & HEATH
Model	QU-SB
Category	Music Mixer
Language	English