ALLEN & HEATH XONE:DB4 User Manual

Allen & Heath 11 XONE:DB4 User Guide
FILTER ASSIGN SWITCH
Set the 3-position switch to its mid position to
route the signal direct to the mix, or to its left
or right positions to route the signal to Filter-1
or Filter-2 respectively. See page 12 for more
information on the filter system.
10
X-FADE ASSIGN SWITCH
Set the 3-position switch to its mid position to
route the signal direct to the mix, or to its left
or right positions to route the signal to
Crossfade-X or Crossfade-Y respectively.
11
CHANNEL CUE SWITCH
Press the cue switch to listen to the channel pre
-fade signal in the headphones and see its level
on the main meters. The button will illuminate
when selected.
Press the switch to deselect cue. The switches
are interlocked; pressing another one turns off
the previous selection.
Multiple cueing may be achieved in one of two
ways:
1. Pressing two or more cues simultaneously.
2. Holding down an active cue allows
momentary activation of any other cue
when pressed.
12
CHANNEL METER
Displays the channel signal level. It is post-EQ
post-FX, and pre-fader.
The channel level control should be set so that
the channel meter averages around ‘0’, with
loudest peaks no higher than ‘+6’. Turn down
the Trim control if the PK! indicator lights.
13
CHANNEL FADER
A high quality, smooth travel, dual-rail fader
adjusts the channel signal level from fully off to
fully on.
14
MUSIC CHANNEL
10
14
1
11
13

ALLEN & HEATH XONE:DB4 Specifications

General

Frequency range	22 - 22000 Hz
Channels quantity	4 channels
Digital sound processing	- bit
Number of EQ bands per channel	4
Line Signal-to-Noise Ratio (SNR)	104 dB
XLR out	2
Microphone in	Yes
Line inputs (RCA)	8
Headphone connectivity	3.5 mm/6.35 mm
USB 2.0 ports quantity	1
Product color	Black
Video capability	No

Weight and Dimensions

Depth	358 mm
Width	320 mm
Height	88 mm
Weight	5100 g
Package depth	260 mm
Package width	530 mm
Package height	470 mm
Package weight	8600 g