ALLEN & HEATH ZED 14 User Manual

Allen & Heath 20 ZED-14 User Guide
USB & MASTER SECTION
12
10
Alternate output level control
The Alt (Alternate) Output is useful for connecting a
pair of monitor speakers separate to the main outputs.
The level control adjusts the volume of the output from
off to +6dB.
9
Headphone level control
Adjusts the level of the headphone signal.
Warning ! To avoid damage to your
hearing do not operate the headphones
or sound system at excessively high
volume. Continued exposure to high
volume sound can cause frequency
selective or wide range hearing loss.
!
9
&
OO
30
L
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
R
PFL ACTIVE
MIN MAX
PHONES
AUX1
AUX2
2TRK RTN
USB RTN
STEREO
OO +6
ALT
OUT
MONITOR
LR
OO +6
AUX1
MASTER
OO +6
AUX2
MASTER
5
20
10
5
0
10
POST
PRE
LR
POWER
48V
PHONES
RL
0
0
0
PHANTOM POWER
ALLEN HEATH
AUX4 OUT
+16
-6
-9
-20
-30
-16
-12
-3
0
+3
+6
+9
10
11
Alternate output selector switches
These under-panel switches select the signal source for
the Alt output. They select between the L R pre-fade, L
R post-fade or the monitor L R signals.
11
12
Aux 1 & 2 master level controls
For adjusting the level of the Aux 1 and 2 outputs. The
range of level control is from off to +6dB.
13
Master L R faders
High quality 100mm faders for the main L R outputs.
10dB gain at the top, unity gain marked at “0”.
13
Monitor selector switches
These 4 switches select the signal source for the head-
phones monitor and the meters. They work on a prior-
ity basis. If they are all up then the post-fade main L R
signals will feed the monitor circuit, if USB and 2 TRK
are pressed, then only the 2 TRK signals will feed the
monitor circuit. The stereo option of pressing both
AUX 1 and AUX 2 together allows Aux 1 to feed the
left and Aux 2 to feed the right monitor circuit. This is
useful if a stereo mix is set up using Auxes 1 & 2.
8
8

ALLEN & HEATH ZED 14 Specifications

General

Brand	ALLEN & HEATH
Model	ZED 14
Category	Music Mixer
Language	English