Allen & Heath 13 ZED POWER 1000
SPECIFICATIONS
Amplifier specification
Amp Class D 500W + 500W with toroidal linear PSU.
9 band 2 channel graphic EQ.
Speaker impedance 4 to 8 ohms
Protection Amp thermal shutdown, Transformer resettable
thermal fuse, Over and under voltage shutdown,
DC offset shutdown, Backup crowbar protection,
Over current protection.
Cooling 60mm fan
Performance
Frequency response both channels, 200W RMS 1kHz
sine wave, 4 ohm loads
12Hz to 30kHz (-1/+1 dB)
THD both channels, 200W RMS 1kHz sine wave, 4 ohm
loads
0.3%
Music power with 40% duty cycle, 1kHz sine into single/
dual 4 ohm load, <1% distortion
500W / 450W
Music power with 40% duty cycle, 1kHz sine into single/
dual 8 ohm load, <1% distortion
285W / 265W