Rockwell Automation Publication 1794-IN082D-EN-P - January 2019 17
FLEX I/O EtherNet/IP Adapters
Specifications
FLEX™ I/O EtherNet/IP Adapter - 1794-AENT
Attribute Value
I/O capacity 8 modules
Power supply
To comply with the CE Low Voltage Directive (LVD), this equipment must
be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
Power supply
To comply with the CE Low Voltage Directive (LVD), this equipment must
be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
Input voltage rating 24V DC nom
Input voltage range 19.2…31.2V DC (includes 5% AC ripple)
Communication rate 10/100 Mbps
Indicators
Module Status – red/green
Network Status – red/green
Link Status – green
Flexbus output current 640 mA max
Isolation voltage
50V continuous, Basic Insulation Type
Tested at 1000V AC for 60 s, power to Flexbus to Ethernet
Power consumption 550 mA max, 440 mA max at 24V DC
Power dissipation 7.3 W max @ 19.2V DC
Thermal dissipation 24.9 BTU/hr @ 19.2V DC
Ethernet connector RJ45 Cat. 5
Weight, approx. 179 g (6.31 oz)
Enclosure type rating None (open-style)
North American temp code T4A
ATEX temp code T4
To Next Page
Loading...
Need help?
General
