Allen-Bradley ProcessLogix B Series User Manual

ProcessLogix and ControlLogix System Redundancy Module 23
Publication
1757-IN092E-EN-P - November 2007
Remove or Replace the Module
1. Push on upper and lower module tabs to disengage them.
2. Slide the module out of the chassis.
IMPORTANT
If you want to resume system operation with an identical module,
you must install the new module in the same slot.
1
2
Allen-Bradley Parts

Allen-Bradley ProcessLogix B Series Specifications

General

Brand	Allen-Bradley
Model	ProcessLogix B Series
Category	Control Unit
Language	English