Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 69
Network Communications Chapter 3
PowerFlex 750-Series Communication Options
The PowerFlex 750-Series drives communication option modules are provided in
Tab l e 42
. The 750-Series option modules offer more advanced features than the
20-COMM adapters. For additional information,
see the PowerFlex 750-Series
Drive DeviceNet Option Module User Manual, publication 750COM-UM002
,
and the PowerFlex 20-750-CNETC Coaxial ControlNet Option Module User
Manual, publication 750COM-UM003
.
PowerFlex 755 Embedded EtherNet/IP Adapter
The PowerFlex 755 drive not only supports a full array of communication
options but also has a standard embedded EtherNet/IP adapter. For complete
information, refer to the Drive Embedded EtherNet/IP Adapter User Manual,
publication 750COM-UM001
.
Software Versions
The PowerFlex 750-Series drives use the same software packages as the PowerFlex
700 drives but knowing the software versions of each drive is essential to an
effective migration. See the table below.
Table 43 - PowerFlex 750-Series Drives and Provided Software Versions
Table 42 - 750-Series Communication options
Catalog Number Description
20-750-BNETIP BACnet/IP option module
20-750-CNET Coaxial ControlNet option module
20-750-DNET DeviceNet option module
20-750-ENETR Dual-port EtherNet I/P option module
20-750-PBUS PROFIBUS DPV1 option module
20-750-PNET Single-port Profinet I/O option module
20-750-PNET2P Dual-port Profinet I/O option module
PowerFlex Drive Model Drive
Explorer
Version
DriveTools
SP Version
RSLogix 5000
Version (with
integrated
drive profiles)
Connected
Components
Workbench
Version
753 6.02 5.02 17 or higher 1.02.00 (and
higher)
755 (before version 2) 6.01 5.01 16 or higher 1.02.00 (and
higher)
755 (version 2 and higher) 6.02 5.02 17 or higher 1.02.00 (and
higher)
To Next Page
Loading...
Need help?
General
