Alto-Shaam Vector VMC-F3E User Manual

OPERATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
82
How to Update Software with a USB Drive
Before you begin ▪ The chambers should be off (not preheated).
▪ You will need a USB drive with the updated software.
▪ Do not remove the USB drive during the update process.
Procedure To update the software, do the following.
Step Action
1. Touch the menu icon a. The menu screen displays.
2. Touch the Settings icon b. The general settings screen displays.
Continued on next page
VMC-TS-009519
a
VMC-TS-009523
b

Alto-Shaam Vector VMC-F3E Specifications

General

Brand	Alto-Shaam
Model	Vector VMC-F3E
Category	Oven
Language	English