INSTALLATION
Ve ct or F ® Se ries ▪ O pera to r’s Man ual ▪ MN-468 94 ▪ Rev 1 ▪ 7/2 0
24
Installation Checklist
Installation of the oven is to be completed only by an authorized Alto-Shaam
service partner.
Place this form with the oven’s records.
Continued on next page
WARNING: Electric shock and arc flash hazard.
Use caution when measuring line voltage and line current.
Wear Personal Protective Equipment (PPE).
Installation date: Start up date:
Location name: Location address:
Contact name:
Contact phone number: Oven model number:
Contact email: Oven serial number:
IT Administrator name:
(if applicable)
Oven rated voltage:
Phone number:
Oven physical condition Damaged
Record any damage with details before or after
uncrating, location of damage, etc. Take pictures.
Yes No
Front of oven
Left side
Back of oven
Right side
Top and bottom/legs
Oven visual inspection (outside) Yes No
Is all packing material removed from the outside of the oven?
Is all packing material removed from the inside of the oven?
Are all of the cooling fan filters installed correctly?
Are all of the internal grease filters installed correctly?
(H Series models only)
Are all of the jet plates in place and installed correctly?
Oven visual inspection (internal)
Loose/Damaged
Yes No
Check all electrical connections at each terminal block.
Check all circuit board connections.
Check all components for loose connections and hardware.
Check the overall system for any damage from shipping or installation.
To Next Page
Loading...
Need help?
General
