Amana RCS10 User Manual

www.amanacommercial.com
 2000 Amana Appliances
Amana, Iowa 52204
Quick Reference Instructions
Read “Important Safety Information” before using “Quick
Reference Instructions”. If there are unanswered
questions, see detailed sections of this manual.
Interrupting Operation
Open oven door or press STOP/RESET pad to interrupt
operation. Display continues to show countdown time.
Close door and press START pad to resume oven
operation.
Canceling Mistakes
If oven is not cooking, press STOP/RESET pad to clear
display. If oven is cooking, press STOP/RESET pad once
to stop oven, then again to clear display. If oven door is
open and time shows in display, close oven door and
press STOP/RESET pad to clear display.
Operating Pre-programmed Pads
1. Open oven door, place food in oven, and close oven
door.
2. Press numbered pad(s).
3. Oven stops cooking and oven signal sounds when
cooking timing elapses.
Manual Time Entry
1. Open oven door, place food in oven, and close door.
2. Press TIME ENTRY pad.
3. Press numbered pads to enter desired cooking time.
4. Press POWER LEVEL pad to change power level.
5. Press a numbered pad to enter desired power level.
6. Press START pad.
7. Oven stops cooking and oven signal sounds when
cooking timing elapses.
Programming Number Pads
For single pad programming, user option should be set to
90. For double pad programming, user option should be
set to 91
1. Open oven door.
2. Press and hold pad 1
for approximately 5
seconds.
3. Press numbered
pad(s).
4. Press numbered pads to enter desired cooking time.
5. Press POWER LEVEL pad to change power level.
6. Press a numbered pad to enter desired power level.
7. Press START pad to save new cooking time and
power level in oven memory.
8. Press STOP/RESET pad or close oven door to exit
programming mode.
Part No. 12392642
Printed in U.S.A. 1/01
Programming Multiple Cooking Stages
1. Open oven door.
2. Press pad 1 for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows “P”
(“P:0” if in double pad programming mode).
3. Press numbered pad(s) to select memory pad
program.
• Display shows cooking time and power level if other
than 100 percent power.
4. Press numbered pads enter desired cooking time.
5. Press POWER LEVEL pad to change power level.
• Display shows current power level if other than 100
percent power.
6. Press TIME ENTRY pad.
• Display briefly shows "P:3
2
" (“P:03” if in double pad
programming mode) indicating programming, pad 3,
stage 2. Then cook time and power level for stage
show in display.
• Repeat steps 5-8 to create additional stages.
7. Press START pad to save new cooking time and
power level in oven memory.
8. Press STOP/RESET pad or close oven door to exit
programming mode.
Changing X2 Quantity Feature (some models)
1. Open oven door.
2. Press and hold pad 1
for approximately 5
seconds.
3. Press numbered
pad(s) to select
cooking sequence.
4. Press numbered pad to change cooking factor.
5. Press START pad to save changes.
6. Press RESET pad or close oven door to exit
programming mode.
User Options
1. Open oven door.
2. Press and hold pad 2
for approximately 5
seconds.
3. Press a numbered pad.
4. Press numbered pad repeatedly to change setting.
5. Press START pad to save changes.
6. Press RESET pad or close oven door to exit
programming mode.
0P:--
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
CF:08
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
8 P:08
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK

Amana RCS10 Specifications

General

Brand	Amana
Model	RCS10
Category	Microwave Oven
Language	English