5.2 Recommend Tools
• Drill for mounting screw
6. Setup Guide
6.1 Batteries and Dip Switches
The lightning detector requires 2 x AA batteries (not included). We recommend Energizer Lithium
batteries for longer life and a wider operating temperature range.
• Remove the battery door on the back of the transmitter by removing the battery cover, as
shown in Figure 1.
Figure 1
• Before inserting the batteries, locate the dip switches. We do not recommend changing the
dip switches from the default position (all four switches in the down position), but we do
provide the following customization in the event you are receiving false alarms or missing
strikes.
Switch in down position. Switch in up position.
Figure 2
To Next Page
Loading...
Need help?
General