1514
8. AMC customer
service
… the Navigenio is removed and inverted
during the overhead mode and a constant ,
intermittent beep is heard
The Navigenio switches o so that the appliance
does not heat further when it is removed.
When the overhead mode has ended: switch o
Navigenio.
When the overhead mode is to be continued: fit
Navigenio on the pot again, turn the rotary knob
(by at least one resting point) and set at the
desired level again.
… the fuse is blown constantly?
Check if the selected socket is suciently fused
(minimum 10 Ampere).
Disconnect other electronic appliances in the
same electrical circuit.
At AMC, customer service is a constant endeavour
to meet the wishes and needs of our customers!
If you have further questions or suggestions,
please do contact us! We would be pleased to
help you!
7.
What to do,
when...
… the Navigenio automatically shuts o a
long time?
For safety reasons, the appliance is equipped
with a temperature protection switch that
switches o the appliance on overheating.
Wait until the Navigenio switches on again by itself.
This can take up to 30 minutes.
… the Navigenio switches o because the
radio contact with the Audiotherm* is broken
(power indicator, dark)
Set rotary knob at “0” and then again at “A”.
Initialise Audiotherm* again.
* For functions with the Audiotherm, see user
manual of “AMC Audiotherm”.
To Next Page
Loading...
Need help?
General
