4
www.amcelettronica.com
UNIKA v.1.00
Arm / Disarm
Log events
Info Task Bar
Date and hour
Temperature
SOS siren
Badge for signalling
recorded memo
Outputs command
keypad Setup
Microphone
rear HW reset button
setting area*
SD card slot
installer menu
date/hour set
vocal memo recorder
UNIKA
WALL MOUNTING
Unika is housed in BOX on Acrylonitrile-Butadiene-Styrene (ABS). UL94 V-0, with brominated flame retardant, without PBB / PBDE.
For the drilling of the wall, use the figure that represents the measurements of the distances of the holes of plastic box.
The distance of the holes is the 503 standard box.
IMPORTANT: take care that the tamper is closed and fix on the wall.
Drill, taking care not to damage any piping in the back of the wall.
Insert for each hole, 1 fisher with dimater of 4mm and Slide the cables through provided holes.
Fix the box on the wall with the right screw for fisher
fixing holes
cables holes
tamper blade
503 support
tamper blade
After cabling (see the cabling below) close the cover with screw.
SOS silent
To Next Page
Loading...
General