With the Direct/Mute switch in the
"normal" position, the tone controls will
cut their respective frequencies when
turned anti-clockwise and boost them
when turned clockwise. The flattest
response is found when the controls are
in the "12 o'clock position.
PHONES
MUTING
TAPE RECORDING
PLAYBACK
The headphone socket will accept any
headphones fitted with a standard
1/4"(6.35mm) stereo jack plug. When
Headphones are in use, the output to
your loudspeakers will be cut and all the
amplifier's functions will operate as
normal.
By turning the Direct/Mute switch to
"Mute" it is possible to cut the output to
your loudspeakers, a feature which will
prove useful in situations where a lower
volume level may be required for short
periods (e.g. for a phone call ect.)
All sources, Phono, CD, Tuner and Aux
can be recorded via the tape connections.
To record an input, select the required
source and set your recorder to the
record mode.
To record from one tape recorder to
another, the palyback recorder should be
plugged into the Aux/USB socket, and the
recording machine into the Tape socket.
The input selector switch should be set to
"Aux". A recording can now be made in
the normal way.
Set the Tape Monitor switch to the "Tape"
position and set your recorder into the
playback mode.
9
To Next Page
Loading...
Need help?
General
