EasyManuals Logo
Home>Amigo>Scooter>RD

Amigo RD User Manual

Amigo RD
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
KEEP CLEANING SOLVENTS AWAY FROM ELECTRICAL WIRES AND CONNECTIONS.
DO NOT EXCEED PROPER INFLATION LEVEL SPECIFIED ON TIRE OR TIRES MAY BE DAMAGED.
Six Months
Check all screws and clips (that are holding wheels) for tightness and wear.
Check all electrical connections for clean contact.
Charging connection should be inspected for tight connection.
Check tires for wear.
Inspect Seat Posts for wear.
Lubricate Plastic Bearings on Upper Seat Post.
Yearly
Have your Authorized Service Center check your Amigo completely.
Grease Axle and Wheel Hubs.
Lubricate Steering Column Bearings.
Checking the General Condition
For maintenance operations, consult your Authorized Dealer who has all the necessary information. Once a year have the
Authorized Dealer inspect your vehicle thoroughly and carry out in depth maintenance. Regular maintenance allows
defective or worn parts to be identified and improves the normal operation of the vehicle and extends its working life.
Removing the Rear Cover
The Amigo
®
RD, EXT350 and HD450 units have a hinged Rear Cover (Figure 10).
To Open Cover: Tilt the handle fully forward. Pull Cover off of the Pins in the Rear,
lift the Cover over the Seat Post and tilt Cover forward.
Note: It is important to adjust the handle fully forward, to prevent
scratching the rear cover on the handle screws.
To Close Cover: Reposition the handle to a comfortable position. Simply tilt Cover
rearward, guide Cover over the Seat Post, and place Cover on the Pins in the Rear.
Note: It is important to ensure that the Power Cord is fully retracted,
and not loose, after the Cover is repositioned back into place.
Lighting
The Amigo is equipped with a Headlight, and with optional Taillight and Turn Signals. To replace the Headlight bulb, twist
the gray rubber part of the Light Assembly counterclockwise and remove. Bulbs come straight out (do not twist bulbs) of
fixture and should be replaced in reverse order. The Rear Turn Signals and Taillight must be completely replaced.
Battery Maintenance
Gel Cell or VRLA (Valve Regulated Lead Acid) Deep Cycle Batteries are used for operating your Amigo. They are
maintenance-free and are transportable on aircraft, buses, trains, etc. as there is no danger of spillage. By following the
Charger and Battery procedures, you can expect extended battery life.
Fasteners Replacement
Use only Grade 8 (US) or 12.9 DIN (metric) in all applications. For service and replacement parts,
we recommend Amigo authorized parts.
Figure 10

Other manuals for Amigo RD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Amigo RD and is the answer not in the manual?

Amigo RD Specifications

General IconGeneral
BrandAmigo
ModelRD
CategoryScooter
LanguageEnglish

Related product manuals