11
HOW TO SET THE OVEN CONTROLS
When the oven first plugged in, the display will show “1:01”.
During cooking setting process, the oven will return to waiting mode if there is
not any operation within 25 seconds.
During cooking, if press STOP pad once, the program will be paused, then
press RESET pad can cancel the program.
End will display with beeps to remind user the program is over, and it will sound
every two minutes until you press any pad or open the door.
This is a 12 or 24 hour clock, press CLOCK pad once to choose 12 hour clock and
press this pad again to choose 24 hour clock.
1. Press CLOCK pad once or twice.
2. Use the number pads to enter the correct time.
3. Press CLOCK pad again to confirm.
NOTE: During cooking, the current time of the clock can be seen by pressing
CLOCK pad.
1. In standby state or during cooking, press TIMER pad once.
2. Use the number pads to enter desired time. The longest time is 99 minutes 99
seconds.
3. Press START/+30 SEC pad to confirm.
NOTE: During countdown process, the timer time will display for 5 seconds by
pressing TIMER pad, and then press RESET pad within 5 seconds can cancel the
program.
For microwave cooking, just press POWER pad a number of times to enter
cooking power level, and then press the number pads enter cooking time.
The oven will start to cook after START/+30 SEC pad is pressed.
1. Press POWER pad repeatedly to choose the cooking power level.
2. Use the number pads to enter cooking time. The longest time can be set is
99 minutes 99 seconds.
To Next Page
Loading...
Need help?
General
