anko P70B20AP-ST User Manual

6
SPECIFICATIONS
Power Consumption:
230-240V/50Hz,
1200W(Microwave)
Output:
700W
Operation Frequency:
2450MHz
Outside Dimensions:
262mm(H)×452mm(W)×315mm(D)
Oven Cavity Dimensions:
220mm(H)×315mm(W)×294mm(D)
Oven Capacity:
20Litres
Net Weight:
Approx.10.5 kg
INSTALLATION
1. Make sure that all the packing materials are removed from the inside of
the door.
2. WARNING: Check the oven for any damage, such as misaligned or
bent door, damaged door seals and sealing surface, broken or
loose door hinges and latches and dents inside the cavity or on the
door. If there is any damage, do not operate the microwave. Return
the product to Kmart.
3. This microwave oven must be placed on a flat, stable surface to hold its
weight and the heaviest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or high humidity are
generated, or near combustible materials.
5. For correct operation, the oven must have sufficient airflow. Allow 20cm
of space above the oven, 10cm at back and 5cm at both sides. Do not
cover or block any openings on the appliance. Do not remove feet.
6. Do not operate the oven without glass tray, roller support, and shaft in
their proper positions.
7. Make sure that the power supply cord is undamaged and does not run
under the oven or over any hot or sharp surface.
8. The power outlet socket must be readily accessible so that it can be
easily unplugged in an emergency.
9. Do not use the oven outdoors.

anko P70B20AP-ST Specifications

General

Brand	anko
Model	P70B20AP-ST
Category	Microwave Oven
Language	English