To Next Page

To Previous Page

OSD Setting

Basic and simple instruction on the control keys.

1. Press the MENU-button to activate the OSD window.

2. Press or to navigate through the functions. Once the desired function is highlighted,

press the to activate it. If there is a sub-menu, press or to navigate through the sub-menu

functions.

3. Press or to change the settings of the selected function. Press to exit. If you want to adjust

any other function, repeat steps 2-3.

4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and

then press power button to turn the monitor on. To un-lock the OSD - press and hold the

MENU-button while the monitor is off and then press power button to turn the monitor on.

Notes:

1. If the product has only one signal input, the item of "Input Select" is disabled.

2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of "Image Ratio" is

disabled.

3. One of DCR, Color Boost and Picture Boost functions is activated; the other two functions are turned off

accordingly.

Questions and Answers:

Need help?

Do you have a question about the AOC 24G2E and is the answer not in the manual?

AOC 24G2E Specifications

General

Color	black and red, black
Screen Type	led
Touch Screen	no
Webcam	no
OS Compatibility	not applicable
Screen Size	23.8 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	120hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	1 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	80, 000, 000:1
Synchronization	freesync premium (amd adaptive sync)
Horizontal Scan Rate	160 kilohertz
HDR	yes
Built-In Speakers	no
HDMI Ports	2
Voice Assistant	no
Power Consumption	21 watts
Depth with Stand	8 19/20 inches
Height with Stand	19 87/100 inches
Width with Stand	21 11/50 inches
Net Weight without Stand	20.66 pounds