9
Connecting the Monitor
Cable Connections In Back of Monitor:
8
6
7
4
3
2
1
5
1. USB 3.2 Gen 1x2
2. USB3.2 Gen1+Quick Chargingx1
3. USB 3.2 Gen 1x1
4. USB-PC upstream
5. HDMIx2
6. DisplayPortx2
7. Earphone out
8. Power
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image,please refer to
Troubleshoot.
To protect equipment, always turn off the PC and LCD monitor before connecting.
To Next Page
Loading...
Need help?
General
