To Next Page

To Previous Page

Attaching The Optional Wall Mount Arm (not supplied)

Follow these steps to finish installing the wall mounting arm:

1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the

back of the monitor.

2. Insert the 4 screws into the holes and tighten.

3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

NOTE

 100mmx100mm VESA high hole (n=4), M4, pitch =0.7 mm screw mounting kit not included.

 Due to safety concerns, if the VESA mounting kit is purchased separately please make sure the

mounting kit is UL-Listed, and replaceable only by service personnel.

Questions and Answers:

Need help?

Do you have a question about the AOC Envision Series L22H998 and is the answer not in the manual?

AOC Envision Series L22H998 Specifications

General