51
7.2 Firmware Instruction
Step 1: Ready for F/W Upgrade
1.1 Prepare a USB memory.
1.2 Make new folder named 1K. Copy the software to 1K, then rename the bin and pkg file as
“AOC_2K13_BZ_1K.bin” ,“AOC_2K13_BZ_1K_loader.pkg”.
1.3 Copy the 1K from your computer to the USB memory root directory, and remove it from
computer’s USB port!
Step 2: F/W Upgrade
2.1 Insert USB flash disk into TV’S USB .Do as the Figure2.1.
Figure2.1
2.2 AC Off/On the TV, the software will update automatically .TV will automatically restart after finishing
the update.
NOTE: The screen will show the information during updating. Do as the Figure2.2.
Figure2.2
2.3 Press “Menu+1999+back” keys in remote control into the factory menu to check the software version.
Do as the Figure2.3.
Figure2.3
DDC Upgrade
The EDID has been contained in the software, so it is not necessary to update it alone.
To Next Page
Loading...
Need help?
General
