AOC U27P2CA User Manual

3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use
mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric
shock. Never spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a re or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the
stand:
Installed with stand
12 inches
30cm
4 inches
10cm
4 inches
10cm
4 inches
10cm
Leave at lease this
space around the set

AOC U27P2CA Specifications

General

Color depth	10 bit
Pixel pitch	0.1554 x 0.1554 mm
Screen shape	Flat
Pixel density	1638 ppi
Backlight type	W-LED
Display surface	Matt
Display diagonal	27 \
Surface hardness	3H
Anti-glare screen	Yes
Adobe RGB coverage	81 %
Display technology	LED
Native aspect ratio	16:9
Maximum refresh rate	60 Hz
Horizontal scan range	30 - 140 kHz
Supported video modes	2160p
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	112 %
Contrast ratio (dynamic)	50000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.07 billion colors
Display diagonal (metric)	68.6 cm
Viewable size, horizontal	596.736 mm
Display scanning frequency	HDMI 2.0/DP 1.2: 30-140 KHz (H), HDMI 2.0/DP 1.2: 23 - 75 Hz (V)
Display brightness (typical)	350 cd/m²
Supported graphics resolutions	3840 x 2160
USB hub version	3.2 Gen 1 (3.1 Gen 1)
DisplayPort version	1.2
Headphone connectivity	3.5 mm
USB Power Delivery up to	65 W
VGA (D-Sub) ports quantity	0
USB Type-A downstream ports quantity	4
Tilt angle range	-5 - 35 °
Height adjustment	150 mm
Cable lock slot type	Kensington
Number of OSD languages	16
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, POL, POR, RUS, SWE
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	75 W
Power consumption (off)	0.3 W
Power consumption (standby)	0.5 W
Power consumption (typical)	37 W
RMS rated power	2 W
Certification	ISO
Product color	Black
Heavy metals free	Hg (mercury)
Market positioning	Business
Compatibility	VESA-P2
Operating altitude	0 - 5000 m
Non-operating altitude	0 - 12192 m
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 85 %
Cables included	Audio (3.5mm), DisplayPort, HDMI
Audio cable length	1.8 m
Package type	Box
Package depth	160 mm
Package width	690 mm
Package height	595 mm
Package weight	9600 g
Sustainability certificates	WEEE
Exterior finish type	Textured
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	200.1 mm
Width (with stand)	613.6 mm
Height (with stand)	544.5 mm
Weight (with stand)	7100 g
Depth (without stand)	51.1 mm
Height (without stand)	369.5 mm
Weight (without stand)	5100 g