APEC RO-CTOP-C User Manual

10
RO-CTOP-C/ RO-CTOP-PHC Pure Water Production Rate
Input Water Pressure Time to fill 8 oz cup Time to fill 1 gallon jug Gallons Per Day
60 psi 60 seconds 16 minutes 90 gpd
50 psi 72 seconds 19.2 minutes 75 gpd
40 psi 90 seconds 24 minutes 60 gpd
30 psi 120 seconds 32 minutes 45 gpd
* Production rate is based on input water temperature of 77 ºF.
* * * End of Owner’s Manual * * *
The RO-CTOP-C/ RO-CTOP-PHC runs solely on the input water pressure from your water pipe line. The
higher the feed pressure, the faster the unit can produce water. High pressure will also improve TDS rejec-
tion.
The chart above shows how different water pressure may effect the performance of the unit. Water pressure
can be determined by using a water pressure gauge. You can also use the pure water production rate as a
simple guide.
For example, it should take approximately 60 seconds to fill an 8oz cup at 60 psi. For very low water pressure,
an optional booster pump (sold separately) can be added to help increase the output rate of the system.

APEC RO-CTOP-C Specifications

General

Brand	APEC
Model	RO-CTOP-C
Category	Water System
Language	English