10 11
CHANGING PROGRAM SCHEDULES
OPERATION & PROGRAMMING
1. Press twice to enter program setting mode.
Start time of the WAKE event is flashing.
2. Press
or to adjust the start time
3. Press
, HEAT setting flashes. Press or
to adjust the heat setting.
4. Press , COOL setting flashes. Press or
to adjust the cool setting.
5. Press
to advance the next event, and repeat
steps 2-5 for LEAVE, RETURN and SLEEP events.
6. Press
to change to weekend program. Repeat
steps 2-5 for the weekend program.
7. Press
to end. “DONE” will display.
The thermostat will return to normal mode if no button
is pressed in 3 seconds.
PROGRAM SCHEDULE OVERRIDES (TEMPORARY, PERMANENT)
OPERATION & PROGRAMMING
Temporary program override
Press
or to immediately adjust the
temperature. This will temporarily override the
temperature setting for the current programmed time
period. The new temperature setting will be maintained
until the next time period of the programmed schedule.
To cancel the temporary override, adjust the temperature
setting back to the programmed temperature, or press
twice.
Permanent program override
Press
to permanently hold the temperature at
its current setting. This will override the temperature
settings for all time periods of the programmed schedule.
With the thermostat in permanent override, the
thermostat temperature can be manually adjusted and
will stay at that setting until the override is cancelled.
To cancel the permanent override press
.
To Next Page
Loading...
Need help?
General
