UPDATES ENGINE C364M
4 - 26
ENGINE C364M
• Check that the plunger of the automatic choke is free
from scratches and rust and slides freely in the seat of
the bearing.
• Use a gauge to measure the protrusion of the plunger
and check that the value is correct.
• Check that the plunger seal is not warped.
• Remount the choke on the carburettor, insert the
mounting bracket, tighten the two bolts and attach the
cover.
• Join the manifold to the carburettor by matching the
two reference notches and tighten the clamp screw.
To Next Page
Loading...
Need help?
General
