ENGINE
3 - 24
ENGINE C361M
3.5. HEAD COVER - INJECTION ASSEMBLY
3.5.1. REMOVAL OF HEAD COVER INJECTION AS-
SEMBLY
• Unscrew the bolt attaching the air delivery pipe to the
injection head and remove the pipe.
• Unscrew the head attachment bolts and remove the
assembly, including the petrol injector and pressure
regulator.
• Remove the plug and carefully unscrew the tempera-
ture sensor.
• Slip off the dust cover. Use the specific tool to remove
the injector, taking care not to damage its plastic sup-
port.