21
use and maintenance RS 125
#/.42/,3/.4(%2)'(40!24
/&4(%(!.$,%"!2
The electrical parts work only when the ignition
switch is in position "
n".
1) ENGINE STOP SWITCH (
n - m)
Do not operate the engine stop switch “
n - m” in
running conditions.
This is a safety or emergency switch.
With the switch in position "
n", it is possible to start the en-
gine; the engine can be stopped by moving the switch to posi-
tion "
m".
With stopped engine and ignition switch in posi-
tion "
n", the battery may discharge.
When the vehicle has come to rest, after stopping
the engine, move the ignition switch to position "
m".
2) HEADLIGHT SWITCH (
o - p -
•
)
(not provided in the
_
version)
When the light switch is in position "
•
", the lights are off; when
the switch is in position "
p", the parking lights and the dash-
board light are on; when the switch is in position "o", the
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch, see p. 20 (CONTROLS ON THE LEFT PART OF THE
HANDLEBAR).
3) START PUSH BUTTON (
r)
When the start push button "
r" is pressed, the starter makes
the engine run. For the starting, see p. 36 (STARTING).
c
a
a
To Next Page
Loading...
Need help?
General
