Arcam A5 User Manual

10 ARCAM A5_A15_A25 OM EN
Settings Menu
Press the MENU button on the amplifier or the on the remote control.
Use the the navigation buttons on the remote control.
Menu Tree
System Settings
Streamer Input
Select the input that an ARCAM Radia streamer is connected to.
Default is NONE.
Halo Brightness
(A25 Only)
Select the brightness of the dial illuminations.
Default is FULL.
HP Override
Select whether speaker remain on or switch off when wired headphones are
connected.
The default is Off (speakers muted). On = speakers unmuted.
Processor Mode
Select an input for fixed volume
.
Default is OFF.
Processor
Volume
Set the volume for fixed volume input set above.
Default is 25.
Eco Timer
Auto standby duration. Select
O
FF
to disable.
Default is ON.
IR Code
Change the IR code set
if the amplifier remote commands conflict with
another device in your home. Changing this setting does not affect the
remote handset.
Default is 16.
Software Version
Displays the software version of the amplifier.
Factory Reset
Reset the amplifier to factory defaults. Press Select to initiate the reset.
Software Update
Initiate an update of the amplifier software by USB. Press Select to initiate
the USB. A USB must be present in the SERVICE USB socket with the
amplifier software stored on it for the update to occur.
BT Settings
BT AUTOSWITCH
(Bluetooth Input
Auto Switch)
Enables or disables the automatic switching of the Bluetooth input when
music is played from a connected device.
Default is ON.
BT Max Volume
Set the
maximum volume for the Bluetooth Input.
Default is 30.
Clear (Device)
List
Clear the memory of paired devices from the amplifier. Press Select to
delete pairings.

Arcam A5 Specifications

General

Brand	Arcam
Model	A5
Category	Amplifier
Language	English